School of Materials and Mineral Resources Engineering,
Engineering Campus,Universiti Sains Malaysia,
14300 Nibong Tebal,Penang, Malaysia
hazizan@usm.my
+604-5996907
+6013-4333137
These is our current research, we think deaply and find the best for our future.
Recently, 3D printing technology has shown to be an attractive alternative to produce an implantable device compared with conventional intraoperative molding.
The Electrospray Deposition Method (ESD method) is the technique of spraying various kinds of solution of biomacromolecules and/or synthetic polymers, to make them form nano-sized particles and fibers (nano-fiber), and to let them deposit and adhere on a substrate using electrostatic force.
Chemical vapor deposition (CVD) are used to deposition a layer or layers of a substance onto a surface.
The colloidization is to improve the dispersion and prevented re-agglomeration.
Pultrusion is a continuous process for manufacture of composites with constant cross-section.
The hydrothermal reactor use to carry hydrothermal reaction at high pressure and high temperature
A coating is a covering that is applied to the surface of an object, usually referred to as the substrate. The purpose of applying the coating may be decorative, functional, or both.
Impact Testing is usually thought of in terms of two objects striking each other at high relative speeds.
A sandwich-structured composite is a special class of composite materials that is fabricated by attaching two thin but stiff skins to a lightweight but thick core.
Tribology is the science and engineering of interacting surfaces in relative motion.
An ionic liquid is a salt in which the ions are poorly coordinated, which results in these solvents being liquid below 100°C, or even at room temperature